The Netgear WN3500RP Setup of N600 WiFi Range Extender not only improves your dual-band WiFi, but it also lets you stream songs to a wired speaker using Airplay or DLNA. You can also plug your printer into the USB port and print wirelessly from your iPhone or iPad using AirPrint. You can also connect 1 wired computer to your wireless network, including smart TVs, game consoles. Here, you can read the setup steps for the Netgear WN3500RP Extender Setup. Continue to read.
Netgear WN3500RP N600 Extender Setup
Method manual
- Netgear WN3500RP Extender N600 Power on and wait for the power LED status to turn green.
- On a computer, open an internet browser. The browser can take you straight to the setup guide for the on-screen Netgear genie setup. You can also access it by typing in the URL bar of your browser, www.mywifiext.net.
- Choose the name of your current wireless network to be expanded, and then press Proceed.
- Enter your key or passphrase for the router and press Proceed.
- If your wireless network does not appear, please check to make sure that your extension is within your main network’s wireless range.
- Wait 2 minutes and your device gets disconnected from the wireless network automatically.
- Go back to the Extender Genie screen once you have successfully linked your wireless computer/device to your network.
- Your extender is now installed successfully if you see the ‘congrats’ page. Click Finish to close the setup page for the Netgear WN3500RP N600 extender.
You would be able to upgrade the WiFi at your home or company by following the same instructions. You can get advice from our experts if you are still having a difficult time during the Netgear WN3500RP Setup.
New Netgear WN3500RP Firmware Update
Does your WiFi Extender start acting oddly all of a sudden? Even after a good Netgear WN3500RP Setup, does it not provide the speed required? If so, upgrade the firmware to the Netgear Extender setup immediately. Netgear Extender Firmware is a compilation of built-in hardware device instructions. Netgear extender firmware, speaking in the language of a layman, is essentially an operating system explicitly intended to Use the specific make and model number of the extender. So, make sure that your extender has the new firmware update. Here’s how to update your firmware to Netgear WN3500RP:
- Switch on your Netgear WN3500RP N600 WiFi extender, first and foremost.
- Attach the extender to a router.
- Once done, open a web browser as you prefer.
- Now in the Address Bar type MYWIFIEXT.NET & hit the Enter button.
- Use your username and password to log in to the extension.
- Now in this step go to the Setup menu and choose the Firmware Update option.
- Click on the Review button after that.
- If new firmware versions are available, press the Yes button to update the firmware.
- Now, wait and let the Netgear WN3500RP firmware update properly for some time.
It’s that! The firmware of your extender has been revised. Don’t hesitate to contact our EXPERTS.
- Mywifiext.net fails to function
- Here you will see no Internet connection but connected to the wifi extender.
- The WiFi Extender is not a network link.
- Issues when accessing the IP address 192.168.1.250
- Even after Netgear WiFi extender WN3500RP setup, Netgear genie smart setup page continues to appear
- Can’t log in to the extender Netgear N600 WN3500RP
- After upgrading WN3500RP N600, you cannot enter mywifiext.net
- WiFi Extender that does not connect to the Internet
- Netgear Extender Not Working
- Red light from Netgear extender causing problems
- Related but not working Internet
- Right password for mywifiext
- Unable to connect to mywifiext.local
- Does not open the Netgear genie app
- Configuration CD Lost
- Issues with WiFi connectivity
- Forgot the default Netgear extender password
- Mywifiext.com fails to load
- WN3500RP loses access to the Internet
- Failed WN3500RP Failed to Function Upgrade
- Unable to find the name of the Netgear range extender network
- WN3500RP N600 Netgear-no internet
- Unable to reset a Netgear extender
Netgear Range Extender WN3500RP SETUP With WPS Method
For the WN3500RP Netgear range extender setup using WPS:
- Power on your WN3500RP extender Netgear N600.
- In the same space, position the extender and WiFi router.
- Plug your extender into an electrical socket until it’s finished.
- Wait for the power LED to light green on the WN3500RP.
- On the extender, press the WPS button.
- The relation between your router and the extender is good if the Netgear WN3500RP Link Status LED lights are white.
Note: If the 5 GHz band is enabled by your router, the first time you push the WPS button, your extender attempts to connect to the router’s 5 GHz band. If your extender has not connected to the 5 GHz band of the router for the first time, during the setup of the Netgear N600 WN3500RP WiFi range extender, it may result in a lot of problems.
- Switch to a different position with your extender.
- Take your machine or mobile device with a WiFi-enabled connection to a spot with limited WiFi router coverage.
- Link an expanded network to your WiFi-enabled machine or mobile device.
That is how you can use the WPS button to complete your Netgear WN3500RP Setup.
Netgear N600 Setup WN3500RP Steps for Troubleshooting:
To fix Netgear N600 WN3500RP setup problems, go through the troubleshooting steps listed below:
- Make sure that the wall outlet receives the right power supply from the Netgear N600 WN3500RP extender.
- Confirm that there is no damage or short-circuit to the wall plugin plugged in by the extender.
- Access to your device’s high-speed Internet connection.
- Check all the links on the cable. Do not use any cables that have been destroyed.
- Now in this step try to keep your extender away from doors, room corners, microwave ovens.